The 6203-N1 is a widely used type of miniature deep groove ball bearing known for its versatility and durability in various applications. This article provides a comprehensive overview of the 6203-N1, covering key specifications, benefits, applications, and guidance for proper usage.
The 6203-N1 has the following key specifications:
The 6203-N1 features:
These features make the 6203-N1 suitable for applications requiring high precision, durability, and load capacity in a compact size.
The 6203-N1 is commonly found in various industries due to its versatility, including:
Load Type | Dynamic Rating | Static Rating |
---|---|---|
Radial | 39 kN | 16 kN |
Axial | Not Applicable | 10 kN |
Combined | Factors Depend on Load Mix | Consult Manufacturer |
Parameter | Value |
---|---|
Bore Diameter | 17 mm |
Outer Diameter | 40 mm |
Width | 12 mm |
Weight | 0.098 kg |
Cage Type | Material |
---|---|
Polyamide | Glass Fiber Reinforced |
Steel | Stamped or Machined |
Brass | Machined |
Cause: Incorrect mounting and alignment, resulting in excessive stress on the bearing.
Lesson Learned: Ensure proper bearing installation and alignment to prevent premature wear and failure.
Cause: Contamination with foreign particles, leading to abrasive wear on the bearing surfaces.
Lesson Learned: Implement proper sealing and lubrication practices to prevent contamination and reduce noise and vibration.
Cause: Overloading the bearing beyond its specified limits.
Lesson Learned: Choose bearings with appropriate load ratings and consider factors such as operating temperature and speed.
Step 1: Prepare the Bearing and Housing: Clean the bearing and housing thoroughly to remove contaminants.
Step 2: Lubricate the Bearing: Apply a thin layer of appropriate grease to the bearing surfaces.
Step 3: Mount the Bearing: Carefully insert the bearing into the housing, ensuring proper alignment and fit.
Step 4: Install the Shaft: Align the shaft with the bearing and gently slide it into place.
Step 5: Tighten the Shaft: Gradually tighten the shaft to the specified torque values to secure the bearing.
Step 6: Secure the Housing: Tighten the housing bolts to the specified torque values to prevent movement.
Step 7: Monitor and Maintain: Periodically inspect the bearing for signs of wear or damage. Relubricate and replace as needed.
The 6203-N1 is a versatile and durable miniature ball bearing suitable for a wide range of applications. By understanding its specifications, benefits, and proper usage techniques, you can optimize its performance and achieve long-term reliability in your designs. Remember to consult with bearing manufacturers or technical experts for specific guidance and recommendations tailored to your unique requirements.
2024-08-01 02:38:21 UTC
2024-08-08 02:55:35 UTC
2024-08-07 02:55:36 UTC
2024-08-25 14:01:07 UTC
2024-08-25 14:01:51 UTC
2024-08-15 08:10:25 UTC
2024-08-12 08:10:05 UTC
2024-08-13 08:10:18 UTC
2024-08-01 02:37:48 UTC
2024-08-05 03:39:51 UTC
2024-09-11 08:06:32 UTC
2024-09-11 12:04:43 UTC
2024-09-11 15:55:12 UTC
2024-09-11 19:34:12 UTC
2024-09-13 05:57:57 UTC
2024-09-15 07:41:26 UTC
2024-09-15 11:42:45 UTC
2024-09-15 15:46:44 UTC
2024-10-19 01:33:05 UTC
2024-10-19 01:33:04 UTC
2024-10-19 01:33:04 UTC
2024-10-19 01:33:01 UTC
2024-10-19 01:33:00 UTC
2024-10-19 01:32:58 UTC
2024-10-19 01:32:58 UTC