The Essential Guide to 6202 Bearing Size

Introduction

6202 bearings are a common type of bearing used in a wide variety of applications. They are characterized by their small size, high precision, and low noise levels. As a result, they are often used in precision instruments, medical equipment, and other applications where reliability and accuracy are critical.

Understanding the 6202 Bearing Size

The 6202 bearing size is defined by its three main dimensions:

• Inner diameter: 15 mm
• Outer diameter: 35 mm
• Width: 11 mm

These dimensions are important to consider when selecting a bearing for a particular application. The inner diameter must be large enough to fit the shaft that the bearing will be mounted on, while the outer diameter must be small enough to fit within the housing or other components surrounding the bearing. The width of the bearing will determine how much axial load it can support.

Types of 6202 Bearings

There are several different types of 6202 bearings available, each with its own unique characteristics. Some of the most common types include:

• Deep groove ball bearings: These are the most common type of 6202 bearing. They are characterized by their simple design and high load capacity.
• Angular contact ball bearings: These bearings are designed to handle high axial loads. They are often used in applications where the shaft is subjected to significant axial forces.
• Cylindrical roller bearings: These bearings are designed to handle high radial loads. They are often used in applications where the shaft is subjected to significant radial forces.

Applications of 6202 Bearings

6202 bearings are used in a wide variety of applications, including:

• Precision instruments: These bearings are often used in precision instruments, such as medical equipment and measuring devices.
• Medical equipment: These bearings are often used in medical equipment, such as surgical tools and diagnostic equipment.
• Industrial machinery: These bearings are often used in industrial machinery, such as pumps, compressors, and conveyors.
• Automotive: These bearings are often used in automotive applications, such as transmissions and differentials.

Benefits of Using 6202 Bearings

There are several benefits to using 6202 bearings, including:

• High precision: These bearings are manufactured to very high precision standards, which makes them ideal for applications where accuracy is critical.
• Low noise levels: These bearings are designed to operate with low noise levels, which makes them ideal for applications where noise is a concern.
• Long service life: These bearings are designed to have a long service life, which can help to reduce maintenance costs.

How to Choose the Right 6202 Bearing

When choosing a 6202 bearing for a particular application, it is important to consider the following factors:

• Load capacity: The load capacity of the bearing is the maximum amount of load that it can support. The load capacity of a bearing is determined by its size, type, and material.
• Speed: The speed of the bearing is the maximum speed at which it can operate. The speed of a bearing is determined by its size, type, and material.
• Accuracy: The accuracy of the bearing is the degree to which it meets the specified tolerances. The accuracy of a bearing is determined by its manufacturing process.
• Environmental conditions: The environmental conditions that the bearing will be exposed to, such as temperature, humidity, and contamination. The environmental conditions that a bearing will be exposed to will determine the type of material that it is made from.

Common Mistakes to Avoid When Using 6202 Bearings

There are a few common mistakes to avoid when using 6202 bearings, including:

• Overloading the bearing: Overloading the bearing can cause it to fail prematurely.
• Operating the bearing at too high a speed: Operating the bearing at too high a speed can cause it to overheat and fail prematurely.
• Using the bearing in an environment that is too harsh: Using the bearing in an environment that is too harsh can cause it to corrode or fail prematurely.

Troubleshooting Common Problems with 6202 Bearings

If you are experiencing problems with a 6202 bearing, there are a few things that you can do to troubleshoot the problem:

• Check the load capacity of the bearing: Make sure that the bearing is not being overloaded.
• Check the speed of the bearing: Make sure that the bearing is not being operated at too high a speed.
• Check the environmental conditions that the bearing is exposed to: Make sure that the bearing is not being used in an environment that is too harsh.
• Check the accuracy of the bearing: Make sure that the bearing meets the specified tolerances.

Replacing a 6202 Bearing

If a 6202 bearing fails, it can be replaced by following these steps:

1. Remove the old bearing from the housing.
2. Clean the housing and the shaft.
3. Lubricate the new bearing with a high-quality bearing grease.
4. Install the new bearing into the housing.
5. Tighten the bearing to the specified torque.

Conclusion

6202 bearings are a versatile and reliable type of bearing that can be used in a wide variety of applications. By understanding the different types of 6202 bearings available and the factors to consider when choosing a bearing, you can select the right bearing for your application and ensure that it operates properly for many years to come.

How to Measure 6202 Bearing Size

To measure the 6202 bearing size, you will need a micrometer or a vernier caliper.

1. Place the micrometer or vernier caliper on the inner diameter of the bearing.
2. Measure the inner diameter of the bearing.
3. Place the micrometer or vernier caliper on the outer diameter of the bearing.
4. Measure the outer diameter of the bearing.
5. Place the micrometer or vernier caliper on the width of the bearing.
6. Measure the width of the bearing.

The 6202 bearing size is typically written as follows:

6202-2RS1

where:

• 6202 is the bearing number
• 2RS1 is the bearing type

6202 Bearing Dimensions

The dimensions of a 6202 bearing are as follows:

6202 Bearing Load Capacity

The load capacity of a 6202 bearing is as follows:

Radial load capacity | 3.6 kN |
Axial load capacity | 2.6 kN |

6202 Bearing Speed

The speed of a 6202 bearing is as follows:

6202 Bearing Price

The price of a 6202 bearing can vary depending on the brand, type, and quantity purchased. However, the average price of a 6202 bearing is between $5 and $10.

Stories:

1. A team of engineers was tasked with designing a new type of bearing that could withstand the high loads and speeds of a new jet engine. They worked for months, but they couldn't come up with a design that met all of the requirements. Finally, they decided to take a break and go for a walk in the park. As they were walking, they saw a child playing with a yo-yo. The child was spinning the yo-yo very fast, and the engineers were amazed at how well it was holding up. They realized that the yo-yo was a perfect example of a bearing that could withstand high loads and speeds. They went back to the lab and redesigned their bearing based on the yo-yo. The new bearing was a huge success and is now used in jet engines all over the world.

2. A group of scientists were working on a new type of medical device that required a very precise bearing. They tried several different types of bearings, but they couldn't find one that was accurate enough. Finally, they decided to design their own bearing. They spent months working on the design, and they finally came up with a bearing that was accurate enough for their medical device. The new bearing was a huge success and is now used in medical devices all over the world.

3. A manufacturing company was having problems with a new production line. The bearings in the production line were failing prematurely, and the company was losing money. The company hired a consultant to help them solve the problem. The consultant looked at the production line and quickly realized that the bearings were being overloaded. He recommended that the company use a larger bearing that could handle the load. The company followed the consultant's advice, and the problem was solved. The production line was running smoothly again, and the company was making money again.

FAQs:

1. What is the difference between a 6202 bearing and a 6203 bearing?

The 6202 bearing has an inner diameter of 15 mm, an outer diameter of 35 mm, and a width of 11 mm. The 6203 bearing has an inner diameter of 17