The 6202RS bearing, a compact and versatile radial ball bearing, plays a critical role in countless industrial, automotive, and household appliances, supporting rotating shafts and reducing friction. Its attributes, including high precision, durability, and affordability, contribute to its widespread adoption.
The 6202RS bearing features a single row of precision-ground ball bearings held within a metal cage. It is shielded on both sides by rubber seals that protect the bearing from dirt, moisture, and other contaminants while retaining lubricant.
As a radial ball bearing, the 6202RS is designed to accommodate radial loads perpendicular to the shaft. It has a deep groove, allowing it to withstand moderate axial loads in addition to radial loads.
The 6202RS bearing finds applications in a vast array of industries, including:
Its compact size makes it suitable for space-constrained applications.
High Precision: The precision-engineered components of the 6202RS bearing ensure smooth operation and accurate shaft guidance.
Durability: Its robust construction and sealed design extend its lifespan, minimizing maintenance requirements.
Low Friction: The ball bearings and smooth raceways minimize frictional losses, enhancing efficiency and reducing energy consumption.
Affordability: Despite its high performance, the 6202RS bearing is budget-friendly, making it a cost-effective solution for various applications.
Attribute | Value |
---|---|
Bore Diameter | 15 mm |
Outer Diameter | 35 mm |
Width | 11 mm |
Bearing Type | Single Row, Radial Ball Bearing |
Cage Type | Metal |
Seals | Rubber Seals (RS) |
Radial Load Capacity | 7.1 kN |
Axial Load Capacity | 2.58 kN |
The Curious Case of the Singing Bearing: A 6202RS bearing in a conveyor belt was making a peculiar squeaking sound. After much investigation, it was discovered that the bearing had become contaminated with a sticky substance that caused it to resonate like a musical instrument. The lesson: contaminants can have unexpected and amusing effects on bearing performance.
The Up-and-Down Washer: A washing machine equipped with a 6202RS bearing began to vibrate excessively during operation. Upon inspection, it was found that the bearing was misaligned, causing the washing drum to bounce awkwardly. The lesson: proper bearing alignment is essential for smooth and efficient operation.
The Case of the Overzealous Lubricator: An engineer overfilled a 6202RS bearing with lubricant, thinking that more is always better. However, the excessive lubrication attracted dirt, clogging the bearing and causing it to fail prematurely. The lesson: lubrication is important, but moderation is key.
Q: How often should I lubricate my 6202RS bearing?
A: Lubrication frequency depends on the operating conditions. As a general guideline, lubricate the bearing every 6-12 months.
Q: Can I use a different type of seal on my 6202RS bearing?
A: Yes, you can use different seals, but they may not provide the same level of protection as the original RS seals. Consult a bearing manufacturer for recommendations.
Q: What is the lifespan of a 6202RS bearing?
A: The lifespan of a 6202RS bearing depends on factors such as operating conditions, lubrication, and maintenance. With proper maintenance, a 6202RS bearing can last for several years.
Q: How do I calculate the dynamic load capacity of a 6202RS bearing?
A: The dynamic load capacity of a 6202RS bearing can be calculated using the following formula: C = P * f * n, where C is the dynamic load capacity, P is the radial load, f is the load factor, and n is the rotational speed.
Q: What is the difference between a 6202RS bearing and a 6202ZZ bearing?
A: The 6202RS bearing has rubber seals on both sides, providing protection against contaminants. The 6202ZZ bearing has metal shields on both sides, offering less protection against contaminants but allowing for higher rotational speeds.
The 6202RS bearing is a versatile and reliable component that supports the smooth operation of countless industrial, automotive, and household appliances. Its precision, durability, low friction, and affordability make it an excellent choice for a wide range of applications. By following proper maintenance practices and avoiding common mistakes, you can maximize the performance and lifespan of your 6202RS bearings, ensuring optimal performance and reliability.
2024-08-01 02:38:21 UTC
2024-08-08 02:55:35 UTC
2024-08-07 02:55:36 UTC
2024-08-25 14:01:07 UTC
2024-08-25 14:01:51 UTC
2024-08-15 08:10:25 UTC
2024-08-12 08:10:05 UTC
2024-08-13 08:10:18 UTC
2024-08-01 02:37:48 UTC
2024-08-05 03:39:51 UTC
2024-08-01 21:05:28 UTC
2024-08-01 21:05:44 UTC
2024-08-02 19:47:02 UTC
2024-08-02 19:47:13 UTC
2024-08-03 20:53:52 UTC
2024-08-03 20:54:09 UTC
2024-08-05 00:18:08 UTC
2024-08-05 00:18:18 UTC
2024-10-19 01:33:05 UTC
2024-10-19 01:33:04 UTC
2024-10-19 01:33:04 UTC
2024-10-19 01:33:01 UTC
2024-10-19 01:33:00 UTC
2024-10-19 01:32:58 UTC
2024-10-19 01:32:58 UTC