The 6202 bearing is a widely used radial bearing in various industrial and automotive applications. It is renowned for its reliability, durability, and cost-effectiveness. Understanding its specifications is crucial for selecting the most suitable bearing for your specific requirements.
Dimension | Value |
---|---|
Bore Diameter (d) | 15 mm |
Outer Diameter (D) | 35 mm |
Width (B) | 11 mm |
Basic Dynamic Load Rating (Cr) | 10.6 kN |
Basic Static Load Rating (Cor) | 6.5 kN |
Limiting Speed (rpm) | 12,000 |
Weight | 0.084 kg |
The 6202 bearing typically comprises the following components:
Its compact design and precise manufacturing ensure smooth operation and long service life.
The 6202 bearing is widely used in:
Story 1:
An engineer was perplexed by the premature failure of several 6202 bearings in a manufacturing line. After thorough investigation, they discovered that the bearings were overloaded due to an incorrect assembly procedure. The lesson learned: always consult the manufacturer's specifications for proper installation.
Story 2:
At a bearing distribution center, a customer complained that the 6202 bearings they received were making excessive noise. Upon inspection, it was found that the bearings had been stored in a humid environment, causing the lubricant to degrade. The moral of the story: store bearings properly to maintain their performance.
Story 3:
A maintenance technician was struggling to remove a seized 6202 bearing from a machine. After trying various methods, they finally used a puller to remove it successfully. The key takeaway: use the right tools and techniques for bearing maintenance.
1. Select the Right Bearing: Determine the required load capacity, speed, and operating conditions before selecting a bearing.
2. Proper Installation: Clean the bearing and its mating surfaces. Lubricate the bearing and install it correctly using the recommended tools.
3. Regular Maintenance: Monitor the bearing's condition through regular inspections and lubrication. Adjust or replace bearings as necessary to maintain optimal performance.
Pros:
Cons:
Understanding the specifications and best practices for the 6202 bearing is essential for maximizing its performance and extending its lifespan. By following these guidelines, you can select, install, and maintain 6202 bearings effectively in your applications.
Table 1: Load Capacities
Bearing Type | Basic Dynamic Load Rating (Cr) | Basic Static Load Rating (Cor) |
---|---|---|
6202 | 10.6 kN | 6.5 kN |
Table 2: Dimensions and Tolerances
Dimension | Nominal Value | Tolerance |
---|---|---|
Bore Diameter (d) | 15 mm | ±0.01 mm |
Outer Diameter (D) | 35 mm | ±0.01 mm |
Width (B) | 11 mm | ±0.01 mm |
Table 3: Material Properties
Component | Material | Hardness (HRC) |
---|---|---|
Inner Ring | GCr15 | 58-62 |
Outer Ring | GCr15 | 58-62 |
Rolling Elements | GCr15 | 60-65 |
Cage | Polyamide (PA66) | NA |
2024-08-01 02:38:21 UTC
2024-08-08 02:55:35 UTC
2024-08-07 02:55:36 UTC
2024-08-25 14:01:07 UTC
2024-08-25 14:01:51 UTC
2024-08-15 08:10:25 UTC
2024-08-12 08:10:05 UTC
2024-08-13 08:10:18 UTC
2024-08-01 02:37:48 UTC
2024-08-05 03:39:51 UTC
2024-08-01 21:32:46 UTC
2024-08-01 21:33:02 UTC
2024-08-02 20:22:23 UTC
2024-08-02 20:22:36 UTC
2024-08-03 21:29:34 UTC
2024-08-03 21:29:51 UTC
2024-08-05 00:58:25 UTC
2024-08-05 00:58:38 UTC
2024-10-19 01:33:05 UTC
2024-10-19 01:33:04 UTC
2024-10-19 01:33:04 UTC
2024-10-19 01:33:01 UTC
2024-10-19 01:33:00 UTC
2024-10-19 01:32:58 UTC
2024-10-19 01:32:58 UTC