In the realm of industrial engineering, the 6202-2RS bearing stands as a silent yet indispensable workhorse, playing a crucial role in the smooth functioning of countless machines and devices. Its remarkable performance and durability have earned it a reputation as the epitome of precision engineering and reliability.
At the heart of the 6202-2RS bearing lies a meticulous design that incorporates exceptional features:
The 6202-2RS bearing finds extensive use in a wide spectrum of industries, including:
The 6202-2RS bearing is renowned for its exceptional reliability, as evidenced by its:
Integrating the 6202-2RS bearing into industrial applications offers numerous advantages:
A tale from the construction industry unveils the critical role of the 6202-2RS bearing. A crane operator was plagued by a persistent squeaking noise that hindered work progress. After extensive troubleshooting, the culprit was identified as a worn-out 6202-2RS bearing in the crane's main hoist. Replacing the bearing with a new one instantly eliminated the noise and restored the crane to optimal performance, demonstrating the bearing's impact on operational efficiency.
In the agricultural realm, a farmer faced an unexpected challenge when his tractor suddenly stalled in the middle of a crucial harvest. The cause turned out to be a failed 6202-2RS bearing in the tractor's transmission. Despite the harsh farming conditions, the bearing had performed admirably for several years. Its exceptional durability allowed the farmer to complete the harvest on time, highlighting the bearing's reliability in demanding environments.
A power plant faced a costly dilemma when a massive turbine began experiencing excessive vibration. Inspections revealed that a 6202-2RS bearing in the turbine's shaft had failed. Immediate replacement with a new bearing not only eliminated the vibration but also restored the turbine to its full capacity, averting a potential power outage and saving the plant millions of dollars in revenue.
These humorous stories not only entertain but also underscore the importance of:
Selecting the ideal 6202-2RS bearing for your application requires careful consideration of several factors:
The 6202-2RS bearing offers several advanced features that enhance its performance in demanding applications:
To make an informed decision about whether the 6202-2RS bearing is right for your application, weigh its advantages and disadvantages carefully:
Pros | Cons |
---|---|
Exceptional durability and reliability | Not suitable for extreme high-speed applications |
High load capacity | Limited corrosion resistance in certain environments |
Low maintenance requirements | Can be noisy under certain operating conditions |
Cost-effective solution | May require specific mounting configurations |
The 6202-2RS bearing stands as a testament to the ingenuity and precision of modern engineering. Its relentless performance and unwavering reliability have made it an indispensable component in a myriad of industrial applications. Whether powering turbines, operating construction cranes, or driving agricultural machinery, this bearing remains an unsung hero, silently contributing to the smooth functioning of our industrial landscape.
Dimension | Value |
---|---|
Bore Diameter | 15 mm |
Outer Diameter | 35 mm |
Width | 11 mm |
Weight | 0.08 kg |
Load Type | Rating |
---|---|
Dynamic Radial Load | 6.3 kN |
Static Radial Load | 3.9 kN |
Axial Load | 2.8 kN |
Speed | Value |
---|---|
Maximum Greased Speed | 6,000 rpm |
Maximum Oiled Speed | 10,000 rpm |
Limiting Speed | 12,000 rpm |
2024-08-01 02:38:21 UTC
2024-08-08 02:55:35 UTC
2024-08-07 02:55:36 UTC
2024-08-25 14:01:07 UTC
2024-08-25 14:01:51 UTC
2024-08-15 08:10:25 UTC
2024-08-12 08:10:05 UTC
2024-08-13 08:10:18 UTC
2024-08-01 02:37:48 UTC
2024-08-05 03:39:51 UTC
2024-10-19 01:33:05 UTC
2024-10-19 01:33:04 UTC
2024-10-19 01:33:04 UTC
2024-10-19 01:33:01 UTC
2024-10-19 01:33:00 UTC
2024-10-19 01:32:58 UTC
2024-10-19 01:32:58 UTC