How to Replace a Drum Bearing for Dryer in 5 Easy Steps

If you're hearing a loud, grinding noise coming from your dryer, it's likely that the drum bearing needs to be replaced. This is a relatively simple repair that you can do yourself in about an hour.

Here's a step-by-step guide on how to do it:

1. Gather your tools and materials. You will need a new drum bearing, a socket wrench, and a screwdriver. You can find all of these at your local hardware store.
2. Unplug the dryer from the wall outlet. This is important for safety reasons.
3. Remove the back panel of the dryer. There are usually a few screws that hold the panel in place. Once the screws are removed, the panel should come off easily.
4. Locate the drum bearing. The drum bearing is usually located on the back of the drum. It is a large, circular bearing that supports the drum.
5. Remove the old drum bearing. Use a socket wrench to loosen the bolts that hold the bearing in place. Once the bolts are loose, you should be able to pull the bearing off of the shaft.

Benefits of Replacing a Drum Bearing

• Quieter operation: A new drum bearing will help to reduce the noise coming from your dryer.
• Improved efficiency: A new drum bearing will help the dryer to run more efficiently, which can save you money on energy bills.
• Longer lifespan: A new drum bearing will help to extend the lifespan of your dryer.

How to Replace a Drum Bearing

1. Disconnect the power to the dryer.
2. Remove the back panel of the dryer.
3. Locate the drum bearing.
4. Remove the old drum bearing.
5. Install the new drum bearing.
6. Reattach the back panel of the dryer.
7. Reconnect the power to the dryer.

Common Mistakes to Avoid

• Using the wrong size drum bearing. Make sure to get the right size drum bearing for your dryer model.
• Not tightening the bolts enough. The bolts that hold the drum bearing in place must be tightened securely.
• Not lubricating the drum bearing. The drum bearing should be lubricated with a high-temperature grease.

Effective Strategies, Tips and Tricks

• Use a torque wrench to tighten the bolts. This will help to ensure that the bolts are tightened to the correct torque.
• Apply a thin layer of grease to the drum bearing. This will help to keep the bearing lubricated and prevent it from wearing out prematurely.
• Run the dryer for a few minutes after replacing the drum bearing. This will help to break in the new bearing and ensure that it is working properly.